Roeder Brothers, Inc.

Regular and Heavy Duty High Deck

(BOTH MODELS AVAILABLE IN GOOSENECK OR TAG)
STANDARD FEATURES FOR THESE UNITS AS FOLLOWS:

Regular Duty Model: (Available in lengths of 16 ft. through 24 ft. main deck)

Heavy Duty Model: (Available in lengths of 16 ft. through 40 ft. main deck)

19# 12" wide flange I-Beam used for main frame and hitch assembly.
5" structural channel used for main frame cross supports instead of 3" channel.
2 @ 12,500# dual pin spring loaded jacks instead of one, for more stability when you want to dolly down loaded.
6" structural channel used for a side rail instead of 5" channel for more strength and load bearing capacity in small concentrated areas.
All Trailers over 34'of floor will have extra bridge supports under the main frame from the front of the deck to the front suspension brackets to help support the long span. This is included in the pricing starting at 36 ft., but this is also available on shorter trailers.

BOTH Models: (Standard features)

3" structural channel used for main floor support with formed stake pockets every 16".
Start with Tandem Dexter 7,000# slipper springs with E-Z lube hubs and electric brakes on both axles. (And able to upgrade to many suspension packages available.)
225R-85R-16-E (10 ply) Radial tires on White Mod Wheels.
Phosphate washed, Primed and Painted Top and Bottom with state of the art epoxy primer and polyurethane top coat that is environmental friendly.
Finally but not least the #1 Grade CCA treated yellow pine floor is installed after the trailer is painted. (All floors over 20 ft. in length are staggered splices.)
Spare wheel and carrier.
102" wide (std.) 96" wide is available at no charge.

Many Options are available for both Models: Just a few are mentioned below!

Several Dovetail and ramps. (This option adds 5 ft. of length to total trailer.)
Many storage or load securing options available on both models.
Many floor or deck options available on both models.
Suspension and tire and wheel options available on both models.